Overview

After inhaling the dust air, the air power equipment will result in wear ,the inhaled dust will dirt on the fan blade surface , will cause the decrease of rotor’s dynamic balance accuracy ,reducing its working life greatly, the hazardous chemical constituents in the dust will cause the equipment rust and corrosion.

  AR-ZJ self-cleaning dust collector is improved on the basis of similar products in the domestic ,Had reached international advanced level now.

Application

All industries and various types of air compressor stations ,many small-capacity compressor shared .high-capacity single used .

Raw  materials of compressor in oxygen station.

Blast furnace blower in lron and steel plant

Various capacity of gas turbines

Diesel engine with long time operation

Air-conditioned supply system in tobacco and paper industry

Concentration of air-conditioning system that has higher require to the dust concentration

Sel-cleaning dust collector

Features

The equipment controled by the automatic control instrument ,there are three self-cleaning ways ,namely (1)timing(2)pressure(3)manually.

The equipment can achieve self-cleaning of the air filter Elements grouping ,other filtering devices running as usual.

It can work normally under conditions of relative humidity 100%

Large filtration area ,low-velocity ,small resistance ,showed by LCD.

Long life filter elements ,in general conditions the filter element replacement cycle can up to 2 years

Higher automation ,the main components used imported  parts. can achieve unmanned operation.

Less back blowing consumption usually 0.1~0.6m3/min ( inhalate situation).back blowing pressure0.4~0.6mpa

Light weight design ,which is the bag-dust collector same capacity of 1/3~1/2.

Designs reasonably, achieved NO-Bend design, High-level building block type, convenient installment, fast.

If  any special requirements about the products. we can make non-standard design according to the customers requirement.