Join collection
Hello, Welcome to our official website!

current location:

NewsCategory:
All Company news Industry News
  • 04-20
    2019

    Introduction to special filter cartridges for self-cleaning filters

    product description:1. Imported special air filter / dust removal composite filter paper, high filtration efficiency2. Wide pleat design, large filter area3. Electroplated zinc end caps will not rust4. Electroplated zinc diamond mesh center skeleton with high opening ratio5. Elastic rubber ring seal6. Good moisture resistanceIn addition, the company's main business: filter cartridge _ dust collector _ filter cartridge dust collector _ sintered plate dust collector professional design and manufacturing
  • 04-20
    2019

    About AR-CW mobile welding fume dust collector

    AR-CW mobile welding fume precipitator is specially used to purify harmful gases such as smoke, dust and oil mist generated during welding or polishing, and is widely used in automobile manufacturing, machining, maintenance workshops and other industries.Features:1. Super strong smoke and dust capture effect to ensure the use effect, the suction air volume can be adjusted according to the actual use effect, which is convenient for energy saving;2. It adopts filter cartridge filtration, which has high filtration efficiency (up to 99.9%), large filtration area and long filter cartridge replacement period.3. Adopting integrated design, the fan is installed inside the dust collector and has a compact structure;4. The universal flexible suction arm can rotate 360 degrees, hovering freely, and can directly remove smoke from the source.5. It is equipped with a compressed air cleaning device to facilitate customer operation and maintenance;6. Install the universal wheel and the suction arm to effectively process the moving dust point. The company's main: filter cartridge _ dust collector _ filter cartridge dust collector _ sintered plate dust collector professional design and manufacturing
  • 04-20
    2019

    AR-CH series dust collector electronic control system

    According to the actual production conditions that multiple production lines in the field are not used at the same time, the independent high-mixing machine will run when needed, and the AR-CH dust removal system fan uses the inverter fan.1Inverter fan can adjust the system to handle air volume according to the actual load, reduce waste and achieve energy saving effect.2 Each branch pipe is equipped with an electric valve, which opens the valve when the dust is generated, so the valve on the branch pipe does not need to be opened all the time, which affects the overall dust removal effect.3 Use time control solenoid valve to blow. The pulse interval and pulse period can be adjusted at any time according to the working conditions of the site, achieving a good effect.Aier Environmental provides services such as design, installation, commissioning and after-sales of the overall dust removal system.
  • 04-20
    2019

    China International Rubber (Qingdao) Technology Exhibition successfully concluded

    The China International Rubber Technology Exhibition held by our company at Qingdao International Convention and Exhibition Center on April 9th, 2015 has been successfully completed. Our series of dust collectors have received extensive attention. In recent years, Aier Environmental has continued to improve its product development, and has continued to improve its use of products. At this exhibition, the first prototype that cooperated with Nippon Mining and Mining Co., Ltd. attracted many visitors to visit and discuss. Our on-site technicians also answered them one by one, and carried out with many experts and scholars in the same industry. In-depth communication and discussion. The picture below is a photo of the exchange between our staff and exhibitors.
  • 04-20
    2019

    Brief introduction to the application of AR-CH series dust collector in the masterbatch industry (3) - Piping system

    Pipeline systemAccording to the location of the dust suction point on the site and the position of the dust collector, confirm the pipe direction and confirm the pipe diameter according to the required air volume of the dust suction point. Since the dust hood is installed under the roof, some valves are relatively high in position. Considering the field operation problem, the valve is designed as an electric valve (the valve angle can be positioned anywhere between 0-90°); The low valve is designed as a manual valve. Figure:The top pipe (main pipe) of the floor is connected by flanges. The pipe will be supported at intervals of 4 meters. This design not only strengthens the pipe but also facilitates the maintenance and repair of the pipe in the later stage; the pipe can be designed as a 60° bend to the bottom of the floor. Head, this design ensures smooth airflow, reduces unnecessary tube damage, reduces fan power, and saves electricity costs.The picture of the pipeline site layout is as follows:
  • 04-20
    2019

    Aier Environmental Protection opens its doors

    At the beginning of the new year, the company's production and delivery has entered a state of enthusiasm, and a big start! In the past 2014, Aier's sales have been rising steadily. This is due to the persistence of Aier people's product quality and the concept of “professional, quality, service”, which has won the trust of more and more customers. In the new year, Aier will not be slack in quality requirements and control, and I believe that it will win the trust of more customers. Look at the picture, the vehicle is loaded with the goods and sent to the customer! Also bring us the New Year’s wishes and expectations of the Ayrs!
  • QQ咨询
  • 电话咨询
  • (86)512-58517009
  • (86)512-58516661
  • (86)512-58516711