1. The unique design of submerged flow field is more conducive to the ash cleaning of the filter cartridge;
2. Building block structure, modular composition of the required processing air volume;
3. Large air volume filter cartridge, greatly reducing the dust collector volume and footprint;
4. Low operating resistance of the equipment, effectively saving the energy consumption of the dust removal system;
5. The maintenance and replacement of the filter cartridge is simple, fast, safe and reduces the downtime;

1. The inlet adopts a unique drainage structure, and the flue gas flow is evenly distributed to the filter element.
2. It can modularize the required processing air volume;
3. The compartment is relatively independent, so that the bag can be replaced without stopping.
4. Flue gas temperature, dust collector operating pressure detection, material level detection and fault detection and other system operating status detection;

1. The use of new flat cloth bag, compared with the traditional cloth bag dust collector, can greatly reduce the footprint of more than 40%, to solve the problem of limited installation space of dust collector;
2. Compared with AR-CH cartridge dust collector, AR-FH can be used in high temperature and high dust concentration situations that can not be applied to the cartridge dust collector.
3. The core filter element of the filter bag can be selected according to the actual dust characteristics of the filter bag material;
4. A unique combination of modules enables it to be installed in tight Spaces;
5. The special filter bag can provide a larger filtration area in a small box, and increase the space between the filter bags, longer service life, and reduce the filter bag replacement workload.

1. The treatment dust concentration is high, and suitable filtration materials can be selected according to different conveying materials;
2. The high pressure value of the equipment meets the high pressure conveying conditions;
3. Large air volume filter cartridge, greatly reducing the dust collector volume and footprint;
4. Combined with cyclone structure design, the air inlet has the advantages of cyclone and bag dust collector, and has higher dust removal efficiency.
5. Rich configuration, can add different automation parts to meet the control requirements of the conveying system;

1. The equipment is small in size, covers a small area, and effectively saves space;
2. Low operating resistance of the equipment, effectively saving the energy consumption of the dust removal system;
3. Adjustable pulse backblowing is adopted, and the pressure difference display is provided.
4. Filter elements can be installed in different ways according to site requirements.

1. Super dust removal, effectively remove dust above 0.1 micron, emission concentration <5mg/m;
2. Long service life, wear resistant filter material, service life can reach more than 10 years;
3. The resistance of the equipment is unchanged, the pressure difference is stable, and the equipment is stable.
4. Compared with the filter bag dust collector, the volume can be reduced by 1/2;
5. Can be used for oil 5%, water 10%, acid and alkali resistance to special conditions.

1. The equipment can realize automatic cleaning of air filter components in groups, and other filter components work as usual;
2. Filter elements selected imported filter material, compared with the traditional filter material, this filter material contains polyester fiber components, the filter cartridge has higher moisture resistance, dust is not easy to adhere to the surface of the filter cartridge; Make the self-cleaning filter run in a low resistance environment;
3. High degree of automation, the main components of imported parts, can achieve unmanned operation;
4. Reasonable design, no bending design, high-rise building block combination, easy to install, fast;

The raw gas is introduced into the valve box through the main fan, and the gas enters the heat exchanger through the valve and the diversion hole. When the raw gas passes through the thermal storage ceramic, the gas is preheated by the heat inside the ceramic to near the oxidation temperature. The pollutants are then oxidized in the combustion chamber (by mixing a moderate amount of oxygen into the feedstock gas). The clean gas then leaves the combustion chamber and enters another heat exchanger, while keeping the heat in the heat exchanger. The clean gas is then cooled to close to the feed gas inlet temperature. Finally, the clean gas passes through the diversion hole, lifting valve and clean gas pipeline until the chimney.

※ Energy Saving

※ Heat recovery exceeds 97%

※ VOC removal efficiency up to 99%

※ High air volume & VOC inlet concentration less than 25% LEL

※ Reliable valve design guarantees a VOC removal rate of 99%

※ Multi-tower RTO system can be designed and produced

※ Humanized design, quick installation, and easy maintenance

※ PLC control system

※ Frequency converter reduces power consumption

※ Integrated VPN can be used for remote fault diagnosis and real-time operation

※ Very little NOx is produced

1.RTO dynamic simulation technology

The software can quickly evaluate the impact of design parameters and operating parameters on heat recovery efficiency, gas consumption and other economic effects, which can be used for both the design and use of new equipment and the operation optimization of existing equipment.

2. Remote operation and maintenance control center

Regenerative heat oxidizer is a device for removing volatile organic compounds by combustion.

This type of product is suitable for the purification of high concentration organic waste gas, coating waste gas, odor waste gas, etc.

It is applicable to the frequent change of the composition of the exhaust gas or the components of the exhaust gas that make the catalyst toxic or the activity decline (such as mercury, tin, zinc and other metal vapor and phosphorus, phosphide, arsenic, etc.), which easily make the catalyst lose activity; Halogen and large amounts of water vapor), containing halogen hydrocarbons and other corrosive organic gases.

RTO is generally suitable for the treatment of a variety of organic waste gases with a concentration of 5000~20000mg/m3.

It is suitable for waste gas treatment of lithium battery, glass, paint, spraying, chemical, pharmaceutical, printing and other industries.

It is suitable for waste gas treatment of lithium battery, glass, paint, spraying, chemical, pharmaceutical, printing and other industries.

The washing system mainly consists of washing tower, circulation pipeline, dosing pipeline, fog removal, etc. The exhaust gas enters the lower part of the scrubber through the pipeline, goes upstream, contacts with the absorption liquid from the top down, and absorbs the gas in the exhaust gas. The scrubber is provided with a fog removal layer, spray layer, filler layer and liquid storage tank from top to bottom, and the waste gas enters the scrubber from the air inlet below the tower, and passes through the filler layer and the fog removal layer from bottom to top. The spray water circulates from the liquid storage tank to the spray layer through the circulating pump, and the spray lye contacts and absorbs the tail gas from top to bottom, and falls back to the liquid storage tank at the bottom of the tower. Achieve reverse contact, absorption of exhaust gas function.

Efficient removal of inorganic components from exhaust gases;

It can remove some water-soluble organic substances in the exhaust gas, such as zui, short acids;

The relative humidity of the tail gas reaches 100%, and it is recommended to set a dehumidification device at the back end.

It is suitable for waste gas treatment of lithium battery, glass, paint, spraying, chemical, pharmaceutical, printing and other industries.